High quality and great value do not have to be opposites. ITExamDownload offers the Citrix Architecting a Citrix Networking Solution bank at a reasonable price — 153 practice questions for the 1Y0-440 exam with verified answers, so every dollar goes toward actual preparation.
Citrix 1Y0-440 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: AppExpert | 11% | - Application Optimization
|
| Topic 2: Networking Methodology and Assessment | 11% | - Environment Assessment
|
| Topic 3: Content Switching | 11% | - Traffic Routing
|
| Topic 4: High Availability | 11% | - Resiliency Architecture
|
| Topic 5: SSL and TLS | 11% | - Certificate Management
|
| Topic 6: Citrix ADC Security | 12% | - Security Integration
|
| Topic 7: Citrix Gateway | 11% | - Remote Access Design
|
| Topic 8: Load Balancing | 11% | - Traffic Distribution
|
| Topic 9: Global Server Load Balancing | 11% | - Multi-Datacenter Design
|
About the Citrix Architecting a Citrix Networking Solution Exam: Clear Answers
Citrix recommends extensive Citrix ADC networking experience and completion of CNS-420 training before attempting this exam. These requirements are set by Citrix and can change, so confirm the current rules on the official exam page: https://www.citrix.com/content/dam/citrix/en_us/documents/guide/architecting-a-citrix-networking-solution-exam-prep-guide-440.pdf before registering for the Citrix Architecting a Citrix Networking Solution exam.
Delivery is instant: your 1Y0-440 product is emailed within one minute of payment — download the attachment and start. If nothing arrives within 2 hours, check spam and contact support for an immediate resend. On failure: sit the corresponding 1Y0-440 exam within 60 days of purchase, submit a scanned enrollment slip and the official Score Report PDF within 2 days after the exam, and the refund completes within 7 days. The policy covers the corresponding exam only; attempts within 3 days of purchase, exams never actually taken, free materials, and expired orders are excluded, and the candidate name must match the payer name. If you prefer, exchange your product for two free exam products of equal value and keep the update service on the original.
The Citrix Architecting a Citrix Networking Solution exam contains 64 questions within 150 minutes. The ratio is the real challenge — content alone does not finish the exam, pacing does. Run full timed sessions in the ITExamDownload test engine until finishing early feels normal on the real 1Y0-440 exam.
Citrix spreads the Citrix Architecting a Citrix Networking Solution syllabus over 9 areas, led by Citrix ADC Security (12%), AppExpert (11%), SSL and TLS (11%). Study proportionally to those shares — the complete outline is in the section above this page.
The 1Y0-440 exam is Citrix's official certification test — passing it earns the CCE-N credential at the Expert level. It measures practical IT ability objectively, which is why employers treat the Citrix Architecting a Citrix Networking Solution certificate as a reliable signal — and why candidate numbers keep growing. It also relates to Citrix Certified Expert - App Delivery and Security (CCE-AppDS), extending its value further.
Each Citrix Architecting a Citrix Networking Solution attempt costs $300 USD, with 65% as the pass mark. A retake charges the full fee again, so the smart move is arriving overprepared. Practice with ITExamDownload until your timed mock scores clear 65% comfortably, then book the 1Y0-440 exam once.
Yes — ITExamDownload offers a free demo of the Citrix Architecting a Citrix Networking Solution questions, including a part of the material, so you can download and judge before you decide. After purchase, 365 days of free updates are included; once the year ends, extend the update service at a 50% discount from your member zone.
Citrix Architecting a Citrix Networking Solution Sample Questions:
Scenario: A Citrix Architect has deployed two MPX devices, 12.0.53.13 nc and MPX 11500 models, in high availability (HA) pair for the Workspace labs team. The deployment method is two-arm and the devices are installed behind a CISCO ASA 5585 Firewall. The architect enabled the following features on the NetScaler devices. Content Switching, SSL Offloading, Load Balancing, NetScaler Gateway, Application Firewall in hybrid security and Appflow. All are enabled to send monitoring information to NMAS 12.0.53.13 nc build. The architect is preparing to configure load balancing for Microsoft Exchange 2016 server.
The following requirements were discussed during the implementation:
All traffic needs to be segregated based on applications, and the fewest number of IP addresses should be utilized during the configuration All traffic should be secured and any traffic coming into HTTP should be redirected to HTTPS.
Single Sign-on should be created for Microsoft Outlook web access (OWA).
NetScaler should recognize Uniform Resource Identifier (URl) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
Users should be able to authenticate using either user principal name (UPN) or sAMAccountName.
The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL Which monitor will meet these requirements?
- A. add lb monitor mon_rpc HTTP-ECV -send "GET/rpc/healthcheck.htm" recv 200 -LRTM DISABLED -secure YES
- B. add lb monitor mon_rpc HTTP -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED -secure YES
- C. add lb monitor mon_rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM DISABLED
- D. add lb monitor mon_rpc HTTP-ECV -send "GET /rpc/healthcheck.htm" recv 200 -LRTM ENABLED
Correct Answer: A 🗳️
Scenario: A Citrix Architect needs to assess an existing Citrix ADC configuration. The customer recently found that members of certain administrator groups were receiving permissions on the production Citrix ADC appliances that do NOT align with the designed security requirements. Click the Exhibit button to view the configured command policies for the production Citrix ADC deployment.
To align the command policy configuration with the security requirements of the organization, the__________for________________should change. (Choose the correct option to complete the sentence.)
- A. command spec; Item 6
- B. action; Item 4
- C. command spec; Item 3
- D. priority; Item 2
- E. action; Item 1
- F. priority; Item 5
Correct Answer: D 🗳️
Scenario: The following NetScaler environment requirements were discussed during a design meeting between a Citrix Architect and the Workspacelab team:
All traffic should be secured, and any traffic coming into HTTP should be redirected to HTTPS.
Single Sign-on should be created for Microsoft Outlook web access (OWA).
NetScaler should recognize Uniform Resource Identifier (URI) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
Users should be able to authenticate using user principal name (UPN).
The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.
Which method can the architect use to redirect the user accessing https://mail.citrix.com to https://mail.citrix.com?
- A. add responder action act redirect "\https://\ + HTTP REQ.HOSTNAME. HTTP_URL_SAFE + HTTP.REQ.URL_PATH_AND_QUERY.HTTP_URL_SAFE\n\n" -responseStatusCode 302 add responder policy pol HTTP.REQ.IS_VALID act
- B. add responder action act redirect "https://mail.citrix.com" -responseStatusCode 302 add responder policy pol HTTP.REQ.IS_VALID act
- C. add lb server test SSL 10.107.149.243.443 -persistenceType NONE -cltTimeout 180 -redirectFromPort 80 -httpsRedirectUrl https://mail.citrix.com
- D. add lb server test SSL 10.107.149.243.80 -persistenceType NONE -cltTimeout 180 -redirectFromPort 80 -httpsRedirectUrl https://mail.citrix.com
Correct Answer: C 🗳️
Which three tasks can a Citrix Architect select and schedule using the Citrix ADC maintenance tasks? (Choose three.)
- A. Convert cluster instances to a high availability pair.
- B. Upgrade Citrix ADC Instances.
- C. Upgrade Citrix ADC CPX Instances
- D. Convert Citrix Web App Firewall Policy Instances.
- E. Configure a high availability pair of Citrix ADC Instances.
- F. Convert a high availability pair of Instances to Cluster.
Correct Answer: C,E,F 🗳️
_________ content type supports sending NITRO commands to NetScaler. (Choose the correct option to complete sentence.)
- A. Application/sgml
- B. Application/json
- C. Text/enriched
- D. Text/html
Correct Answer: B 🗳️
Viewing page 1 out of 31 pages.
Viewing questions 1-5 out of 153 questions.



