Some candidates try crowded classroom courses and find the schedule impossible. For them, ITExamDownload offers a self-paced alternative built around Network Appliance NetApp Certified Implementation Engineer-E-Series practice questions, so 60 targeted Q&As on ITExamDownload fit around the NS0-515 exam day.
Network Appliance NS0-515 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Hardware | 12% | - Expanding storage capacity - FC, Ethernet, Infiniband, SAS cabling - E-Series hardware components |
| Storage Configuration | 20% | - Alerting and notification setup - Physical and logical storage requirements - Drive encryption features - Volume Groups and DDP creation/administration - CHAP configuration for iSCSI |
| Troubleshooting | 15% | - System troubleshooting procedures - Multipathing and connectivity issues |
| Data Protection | 10% | - SANtricity protection features - Media scan and data assurance |
| System Management | 15% | - SANtricity System Manager administration - SANtricity Unified Manager configuration - Management security features |
| SAN Network Configuration | 8% | - End-to-end FC and Ethernet configuration |
| Host Side Configuration | 12% | - Host connection options - Multipathing configuration |
| Documentation | 10% | - Site preparation and implementation review - Post-implementation documentation |
| Implementation Tools | 8% | - Design and implementation tools |
Common Questions from Network Appliance NetApp Certified Implementation Engineer-E-Series Candidates
SANtricity Administration and E-Series Implementation: Visit official page
No mandatory prerequisites; 6-12 months hands-on experience with E-Series recommended
The NS0-515 exam contains 59-64 questions and lasts 120 minutes minutes, so pacing matters as much as knowledge. Practicing under a real timer on ITExamDownload helps you learn how long to spend on each item.
The Network Appliance NetApp Certified Implementation Engineer-E-Series material is written by a group of IT experts and certified trainers. Beyond assembling verified questions, they organize the bank into a study strategy for candidates, so you always know which section to tackle next instead of paging through questions at random.
The online engine recreates the atmosphere of the formal test, so the real NS0-515 exam feels familiar rather than intimidating. It runs on Windows, Mac, Android, and iOS, places no limit on the number of installations, and lets you review at any time and from any location, which fits naturally around an IT worker's schedule.
The passing score of NS0-515 is 66%, and the official exam fee is 150 USD. Knowing both numbers early helps you set a concrete target before you book the test.
This package includes 60 practice questions for the NS0-515 exam. Every answer has been verified by our IT experts and certified trainers before release.
- Troubleshooting (15%)
- SAN Network Configuration (8%)
- Implementation Tools (8%)
Study the sections in the order that matches your weakest areas first.
Pearson VUE Registration: register for NS0-515
NetApp Certification Portal: register for NS0-515
Network Appliance NetApp Certified Implementation Engineer-E-Series Sample Questions:
A company is using the Federal Information Processing Standard (FIPS) on all volume groups. However, one volume group failed a security audit.
In this scenario what would cause a volume group to fail the security audit?
- A. An FDE drive was added as a spare in the volume group
- B. Data Assurance was changed to "disabled" for the volume group
- C. Connectivity to the key serverwas interrupted
- D. The Secure Erase operation was applied to the volume group disks
Correct Answer: A 🗳️
Click the Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. wrong switch configuration
- B. twisted cables, wrong plugs, or cable material
- C. protocol errors, encodingerrors, or conversion errors
- D. faulty SFPs, cables, or patch panels
Correct Answer: D 🗳️
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two.)
- A. Set in the Hardware tab using SANtricity System Manager
- B. Change the Feature Pack in the SANtricity System Manager
- C. Set at thefactory, based on the order
- D. Change the QSFP type in the HIC
Correct Answer: A,B 🗳️
Your company has an E-Series system connected to Cisco MDS switches. You are asked to provision a volume on a new Windows host, but the Windows host is unable to connect to the volume on the E-Series system. All other Windows hosts in the fabric are able to connect to their volumes.
In this scenario, which three actions should you perform to accomplish this task? (Choose three.)
- A. Obtain the WWPN for the Windows HBA
- B. Create a new virtual SAN (VSAN)
- C. Restart the switches
- D. Create a single-initiator zone withthe host and E-Series system
- E. Add a zone to the active zoneset
Correct Answer: A,C,E 🗳️
A company wants the most scalable host-side connection topology for E-Series systems.
In this scenario, which FC topology would satisfy the requirement?
- A. fabric attach
- B. arbitrated loop
- C. private loop
- D. direct connect
Correct Answer: A 🗳️
Viewing page 1 out of 12 pages.
Viewing questions 1-5 out of 60 questions.
Armand 
Hardy 
Eugene 
Jo 
Leif 
Mary 
Juliet 
Arlen 
Michael 
Lena 
Elvira 
Abraham 
Corey 
Jay 
Darnell 
Winfred 
Roy 
