Pass Your NSE7_OTS-7.2 Dumps as PDF Updated on 2024 With 74 Questions
Fortinet NSE7_OTS-7.2 Real Exam Questions and Answers FREE
Fortinet NSE7_OTS-7.2 Certification Exam is designed to validate the knowledge and skills of security professionals in the field of operational technology (OT). NSE7_OTS-7.2 exam is part of the Fortinet Network Security Expert (NSE) program, which offers a comprehensive range of certifications to demonstrate expertise in Fortinet products and technologies. The NSE7_OTS-7.2 exam focuses on the Fortinet NSE 7 OT Security 7.2 solution, which is designed to provide advanced security for industrial control systems and other operational technology environments.
The NSE7_OTS-7.2 certification is highly regarded in the industry and is recognized as a benchmark for OT security professionals. Fortinet NSE 7 - OT Security 7.2 certification demonstrates that the candidate has the skills and knowledge required to design, implement, and manage secure OT networks and systems using Fortinet solutions. Fortinet NSE 7 - OT Security 7.2 certification is valid for two years and requires candidates to renew their certification by passing a recertification exam or earning continuing education credits.
NEW QUESTION # 18
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- B. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
- C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- D. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
Answer: C
Explanation:
Explanation
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network
NEW QUESTION # 19
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use a FortiAuthenticator.
- B. You must use a third-party RADIUS OTP server.
- C. You must use the user self-registration server.
- D. You must register the same FortiToken on more than one FortiGate.
Answer: A
NEW QUESTION # 20
What can be assigned using network access control policies?
- A. Layer 3 polling intervals
- B. Logical networks
- C. FortiNAC device polling methods
- D. Profiling rules
Answer: B
NEW QUESTION # 21
FortiAnalyzer is implemented in the OT network to receive logs from responsible FortiGate devices. The logs must be processed by FortiAnalyzer.
In this scenario, which statement is correct about the purpose of FortiAnalyzer receiving and processing multiple log messages from a given PLC or RTU?
- A. To isolate PLCs or RTUs in the event of external attacks
- B. To help OT administrators configure the network and prevent breaches
- C. To configure event handlers and take further action on FortiGate
- D. To determine which type of messages from the PLC or RTU causes issues in the plant
Answer: C
NEW QUESTION # 22
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of FortiGate interface statistics.
- B. This is a sample of an SNMP temperature control event log.
- C. This is a sample of a PAM event type.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: C
NEW QUESTION # 23
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Creating disaster recovery plans to switch operations to a backup plant
- B. Planning a threat hunting strategy
- C. Evaluating what can go wrong before it happens
- D. Implementing strategies to automatically bring PLCs offline
Answer: A,B
NEW QUESTION # 24
An OT administrator is defining an incident notification policy using FortiSIEM and would like to configure the system with a notification policy. If an incident occurs, the administrator would like to be able to intervene and block an IP address or disable a user in Active Directory from FortiSIEM.
Which step must the administrator take to achieve this task?
- A. Deploy a mitigation script on Active Directory and create a notification policy on FortiSIEM.
- B. Create a notification policy and define a script/remediation on FortiSIEM.
- C. Configure a fabric connector with a notification policy on FortiSIEM to connect with FortiGate.
- D. Define a script/remediation on FortiManager and enable a notification rule on FortiSIEM.
Answer: B
Explanation:
Explanation
https://fusecommunity.fortinet.com/blogs/silviu/2022/04/12/fortisiempublishingscript
NEW QUESTION # 25
As an OT network administrator, you are managing three FortiGate devices that each protect different levels on the Purdue model. To increase traffic visibility, you are required to implement additional security measures to detect exploits that affect PLCs. Which security sensor must implement to detect these types of industrial exploits?
- A. Deep packet inspection (DPI)
- B. Antivirus inspection
- C. Intrusion prevention system (IPS)
- D. Application control
Answer: A
NEW QUESTION # 26
Refer to the exhibit. Given the configurations on the FortiGate, which statement is true?
- A. FortiGate is configured with forward-domains to reduce unnecessary traffic.
- B. FortiGate is configured with forward-domains to forward only domain controller traffic.
- C. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.
- D. FortiGate is configured with forward-domains to forward only company domain website traffic.
Answer: A
NEW QUESTION # 27
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Administrative group membership
- B. Host or user group memberships
- C. Location
- D. An existing access control policy
- E. Host or user attributes
Answer: B,C,E
Explanation:
Explanation
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 28
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Enhanced point of connection details
- B. Direct VLAN assignment
- C. Importation and classification of hosts
- D. Adapter consolidation for multi-adapter hosts
Answer: A,C
NEW QUESTION # 29
You are investigating a series of incidents that occurred in the OT network over past 24 hours in FortiSIEM. Which three FortiSIEM options can you use to investigate these incidents? (Choose three.)
- A. IPS
- B. Security
- C. Overview
- D. Risk
- E. List
Answer: C,D,E
NEW QUESTION # 30
Refer to the exhibit.
An OT network security audit concluded that the application sensor requires changes to ensure the correct security action is committed against the overrides filters.
Which change must the OT network administrator make?
- A. Set all application categories to apply default actions.
- B. Change the security action of the industrial category to monitor.
- C. Set the priority of the C.BO.NA.1 signature override to 1.
- D. Remove IEC.60870.5.104 Information.Transfer from the first filter override.
Answer: C
Explanation:
Explanation
According to the Fortinet NSE 7 - OT Security 6.4 exam guide1, the application sensor settings allow you to configure the security action for each application category andnetwork protocol override. The security action determines how the FortiGate unit handles traffic that matches the application category or network protocol override. The security action can be one of the following:
Allow: The FortiGate unit allows the traffic without any further inspection.
Monitor: The FortiGate unit allows the traffic and logs it for monitoring purposes.
Block: The FortiGate unit blocks the traffic and logs it as an attack.
The priority of the network protocol override determines the order in which the FortiGate unit applies the security action to the traffic. The lower the priority number, the higher the priority. For example, a priority of 1 is higher than a priority of 10.
In the exhibit, the application sensor has the following settings:
The industrial category has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that belongs to this category.
The IEC.60870.5.104 Information.Transfer network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The IEC.60870.5.104 Control.Functions network protocol override has a security action of monitor, which means that the FortiGate unit will allow and log any traffic that matches this protocol.
The IEC.60870.5.104 Start/Stop network protocol override has a security action of allow, which means that the FortiGate unit will not inspect or log any traffic that matches this protocol.
The IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a security action of block, which means that the FortiGate unit will block and log any traffic that matches this protocol.
The problem with these settings is that the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override has a lower priority than the IEC.60870.5.104 Information.Transfer network protocol override. This means that if the traffic matches both protocols, the FortiGate unit will apply the security action of the higher priority override, which is block. However, the IEC.60870.5.104 Transfer.C.BO.NA.1 protocol is used to transfer binary outputs, which are essential for controlling OT devices. Therefore, blocking this protocol could have negative consequences for the OT network.
To fix this issue, the OT network administrator must set the priority of the IEC.60870.5.104 Transfer.C.BO.NA.1 network protocol override to 1, which is higher than the priority of the IEC.60870.5.104 Information.Transfer network protocol override. This way, the FortiGate unit will apply the security action of the lower priority override, which is allow, to the traffic that matches both protocols. This will ensure that the FortiGate unit does not block the traffic that is used to transfer binary outputs, while still blocking the traffic that is used to transfer information.
1: NSE 7 Network Security Architect - Fortinet
NEW QUESTION # 31
Refer to the exhibit. In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set a unique forward domain on each interface on the network.
- B. Set FortiGate to operate in transparent mode.
- C. Set a software switch on FortiGate to handle inter-VLAN traffic.
- D. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
Answer: D
NEW QUESTION # 32
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- B. Under config user settings configure set auth-on-demand implicit.
- C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- D. Enable two-factor authentication with FSSO.
Answer: C
Explanation:
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 33
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network. Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Use segmentation
- B. Configure firewall policies with industrial protocol sensors
- C. Configure firewall policies with web filter to protect the different ICS networks.
- D. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- E. Deploy a FortiGate device within each ICS network.
Answer: B,C,D
NEW QUESTION # 34
Refer to the exhibit.
The IPS profile is added on all of the security policies on FortiGate.
For an OT network, which statement of the IPS profile is true?
- A. All IPS signatures are overridden and must block traffic match signature patterns.
- B. The IPS profile inspects only traffic originating from SCADA equipment.
- C. The listed IPS signatures are classified as SCADAapphcat nns
- D. FortiGate has no IPS industrial signature database enabled.
Answer: C
NEW QUESTION # 35
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Direct VLAN assignment
- B. Adapter consolidation for multi-adapter hosts
- C. Enhanced point of connection details
- D. Importation and classification of hosts
Answer: B,D
Explanation:
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 36
As an OT network administrator, you are managing three FortiGate devices that each protect different levels on the Purdue model. To increase traffic visibility, you are required to implement additional security measures to detect exploits that affect PLCs.
Which security sensor must implement to detect these types of industrial exploits?
- A. Deep packet inspection (DPI)
- B. Antivirus inspection
- C. Intrusion prevention system (IPS)
- D. Application control
Answer: A
NEW QUESTION # 37
......
Fortinet NSE7_OTS-7.2 exam is an excellent certification for professionals looking to prove their skills and knowledge in the field of OT security. Fortinet NSE 7 - OT Security 7.2 certification is recognized globally and can open up new career opportunities for certified professionals. With the right preparation and dedication, candidates can pass the exam and become certified Fortinet NSE 7 - OT Security 7.2 professionals.
Pass Fortinet NSE7_OTS-7.2 Exam Info and Free Practice Test: https://pass4sure.itexamdownload.com/NSE7_OTS-7.2-valid-questions.html